Weatherable PVC Powder Compound

Foam Powder Interior PVC Powder Compound

AP1000 Series - A high rate, midrange gloss, PVC powder, extrusion compound for exterior applications.

Cell Class ASTM D4216 1-32433-33 ASTM D3679 Class No. 2
Properties*	Test Method	Typical Values
Specific Gravity, ±0.02	ASTM D-792	1.46
Hardness, Shore D, ±3	ASTM D-2240	79
Tensile Properties
Tensile Strength@yield, psi	ASTM D-638	6 300
Tensile Modulus, psi		380 000
Flexural Properties
Flexural Strength, psi	ASTM D-790	11 600
Flexural Modulus, psi		385 000
Impact
Notched Izod, ft.-lb./inch	ASTM D-256	4.2
Dart Drop, Min. Failure** in.-lb./mil	ASTM D-4226	Procedure A - 1.5 Procedure B - >6.00
Thermal Properties
Heat Deflection Temp. @264 psi, °F	ASTM D-648	163
Coefficient of Linear Expansion	ASTM D-696	3.6 x 10 ^-5 in./in/°F
Flammability
Rate of Burning	ASTM D-635	HB Rating

*All tests conducted at 72°F unless otherwise stated

**Extruded at 380 to 390° F melt temperature

Note: Compound has shown to have good weathering performance under accelerated conditions and outdoor weathering.

Important disclaimers and warning: Seller warrants only that products will meet the above specifications and the data is based on information we believe to be reliable. Except as stated above, Aurora Plastics, Inc makes no representations, guarantees, or warranties, express or implied, including but not limited to any warranty of merchantability or fitness for a particular purpose. Each user should conduct a sufficient investigation to establish the fitness of any product for its intended purpose. For all products listed, user should obtain detailed information on proper shipping, handling, and storage procedures, and comply with all applicable safety and environmental standards, regulations, and laws.

Foam Powder Interior PVC Powder Compound

We value your input! Send questions, comments, or suggestions to our webmaster at: Postmaster@auroraplastics.com