Interior PVC Powder Compound

Foam Powder Weatherable PVC Powder Compound

AP2000 Series - A high rate, high impact PVC powder, extrusion compound, for interior applications.

Cell Class ASTM D1784 14354 ASTM D4216 1-31032-23-0000 ASTM D3679 Class 2

Properties*	Test Method	Typical Values
Specific Gravity, ±0.02	ASTM D-792	1.40 - 1.55
Hardness, Shore D, ±3	ASTM D-2240	80
Tensile Properties
Tensile Strength@yield, psi	ASTM D-638	6 100
Tensile Modulus, psi		370 000
Flexural Properties
Flexural Strength, psi	ASTM D-790	11 500
Flexural Modulus, psi		350 000
Impact
Notched Izod, ft.-lb./inch	ASTM D-256	5.3
Dart Drop, Min. Failure** in.-lb./mil	ASTM D-4226	Procedure A - 1.8 Procedure B - 4.0
Thermal Properties
Heat Deflection Temp. @264 psi, °F	ASTM D-648	160
Coefficient of Linear Expansion	ASTM D-696	3.5 x 10 ^-5 in./in/°F
Flammability
Rate of Burning	ASTM D-635	HB Rating

*All tests conducted at 72°F unless otherwise stated

**Extruded at 380 to 390° F melt temperature

Important disclaimers and warning: Seller warrants only that products will meet the above specifications and the data is based on information we believe to be reliable. Except as stated above, Aurora Plastics, Inc makes no representations, guarantees, or warranties, express or implied, including but not limited to any warranty of merchantability or fitness for a particular purpose. Each user should conduct a sufficient investigation to establish the fitness of any product for its intended purpose. For all products listed, user should obtain detailed information on proper shipping, handling, and storage procedures, and comply with all applicable safety and environmental standards, regulations, and laws.

Foam Powder Weatherable PVC Powder Compound

We value your input! Send questions, comments, or suggestions to our webmaster at: Postmaster@auroraplastics.com